Hira is light and breezy and is great for layering on a cold summer evening. It can be worn over a pretty evening dress or make it casual by pairing with jeans and a tee. The beads on the collar and the sleeves jazz up the cardigan turning the simple cardigan into a special-occasion-wear. I just love the beads on the sleeves, if I say so myself.
Hira is knit from the top-down with raglan sleeves. After the body-sleeves split, the body is worked flat with waist shaping. Sleeves are knit in the round. Stitches for the collar are picked and worked flat, knit to the double the width with a garter ridge, over which the collar gets folded and sewn in place. Don’t worry, the sewing is on the wrong side, so not publicly visible at all.
Grown-up Hira is women’s version of Hira, so you can make a mother-daughter cardigan if you like.
I used a simple, textured stitch pattern for Just Hatched Cardigan. I loved the simplicity of this stitch so much that I decided to use it in a blanket. I initially thought of using this as an all over stitch pattern, but I liked it better when I paired it with stockinette. The obvious choice was to have panels of stockinette and texture, but I wanted something different. Then I zeroed in on making this a center-out blanket with alternate panels of stockinette and texture.
The pattern is written for sport, DK, worsted and Aran weight yarn. The pattern recommends needle sizes for all yarn weights, but you can use any needle size which gives you the fabric you like. Center-out knitting means you can customize the size easily
Dyvest is a unisex vest with an attractive cable stitch pattern down the front. The Y-shaped staghorn cable divides into a similar half-staghorn stitch on either side of the V-neck, hence the name Dyvest.
The staghorn and half-staghorn are simple to knit with just 3 rows of cable and plain wrong side rows. Both cables are charted and written instructions are also provided.
The vest is knit bottom-up in round until the armholes and then the fronts and back are knit flat. The shoulders are joined using three needle bind-off. Armbands and neckbands are knit after picking up stitches.
16 sts x 22 rows = 4″ in Stockinette Stitch
20 sts x 20 rows = 3.5″ in Staghorn Cable stitch pattern
Finished Chest Measurement:
17.5 [19.5, 21.5, 23.5] [25.5, 27.5, 29.5] inches
Vest is intended to be worn with 1-2″ of positive ease.
I knit the prototype using Bessie May Nettle, which is a blend of wool and plant fiber. This is the first time I worked with a plant fiber and I was blown away by the stitch definition – the cables are neat and crisp. I had to work on the fronts a dozen times, so I can vouch for ‘froggability’ of the yarn too, boys is it sturdy. With the main color as dark grey and the light grey heather, Coal colorway is an excellent choice for men’s and boys’ knits.
I am so excited that my Entropy Vest is published as part of Petite Purls Issue 14. I have always admired the patterns published in Petite Purls, so I am very happy to have a pattern of mine published by them.
Entropy Vest is a take on the classic argyle vest. With its off-center argyle motifs, the vest tries to bring in a disorder in the otherwise ordered universe, hence the name Entropy. The vest is knit bottom-up in the round until the armholes, and the fronts and backs are worked flat separately. The argyle work is just 20 rows, so this is ideal for a beginner colorwork knitter.
I am very happy to announce the release of Punto Cowl & Hat patterns which are released as part of Malabrigo Quickies. From Malabrigo Yarns website: Quickies are small, fast projects which require only one or two skeins of yarn. You could knit a small cowl and a hat in one skein each of MC and CC yarn. These patterns can be bought individually or as an ebook.
While I love variegated yarns, I don’t like how muddy they look when used with cables or lace. I am not a big fan of pooling in stockinette stitch either, so the obvious step was to pair it with a plain yarn and make something colorful with it. Punto stitch pattern (as I would like to call it) is knit with one yarn per row (no carrying the other yarn) and the colorful CC yarn shows up as little specks or dots against the MC yarn.
Punto Cowl comes in 3 sizes. Small: 20 inches wide, a snug fit around your neck, Medium: 28 inches wide, a loose, comfortable fit around your neck and Long: 44 inches wide, where the cowl can be worn doubled up. All sizes are 8 inches high. Width and height can be easily modified by working more repeats of the stitch pattern.
Punto Hat comes in 4 sizes. S [M, L, XL]: 18 [20, 22, 24] inches. These are the finished sizes. Choose the size which give you no ease or an inch of negative ease.
I had this gorgeous skein of Malabrigo Rastita in my stash in the beautiful colorway Archangel colorway. The beautiful hues kept calling my name every time I looked at them. I would pet the yarn and keep it back because finding a pattern for variegated yarn is quite difficult. I know slipped stitches help in breaking up the colors and help in avoiding pooling, so I picked up a simple yet beautiful stitch pattern and made a swatch.
When that experiment went well, I made a hat with it and figured out a neat decrease which didn’t disturb the stitch pattern and voila we have Madhu Hat. The slipped stitch pattern is called ‘honeycomb’, so I named the hat Madhu, which means honey.
This hat takes less than half a skein of sportsweight yarn and is particularly suitable for variegated yarn. It knits up in no time at all and it adds a bit of quirkiness to the classic beanie with its asymmetric ‘flap’.
Pattern: Madhu Hat Yarn: Malabrigo Rastita [Sport/5 ply] Needles: US#5 3.75 needles, circular or DPNs Sizes offered: S [M, L]: 22 [24, 26] inches, unstretched Yardage: 150 [170, 200] yards
The hat is knit bottom-up with a provisional cast-on (casting on using waste yarn). After working the brim and shaping the crown, the hat is cast off. The provisional cast on is revealed to get live stitches around the brim and then the asymmetrical ‘flap’ is shaped with short rows. If you are not adventurous to try to short rows or do not like the asymmetric flap, then you can cast-on with the main yarn (as opposed to waste yarn). If you see a small hole at the place where you turn your work for short row shaping, this should cover up while blocking.
While this knitting pattern is suitable for variegated yarn, it looks great in semi/solid colored yarn too.
I am so excited that my Tara Shrug is published as part of Knit Now October Issue. I worked on this design almost 6 months back and just when I was ready to self-publish it, I saw the call from Knit Now and they were looking for quick knits. Since then I have been patiently waiting so that I could show this pattern off.
Photo Credit: Knit Now
Tara shrug is a great last minute gift for the little star in your life. The lace is simple and easy to memorize with all wrong side rows being ‘resting rows’. The shrug is knit flat as a rectangle in the openwork diamond lace pattern. After working the sleeves ribbing, the shrug is seamed at both ends to make sleeves. The body ribbing is knit in round.
Texo (Latin word Texo for ‘weave, twine together’) is a take on the traditional crewneck pullover with a cabled pouch added for extra warmth for the hands. The cabled pouch adds interest and texture to the otherwise plain pullover. The i-cord edges on the pouch give it a neat finishing touch. The top-down seamless construction makes this an ideal pullover to try it on as you go and also to modify the body and sleeves length.
FILO are FIngerless GLOves with a simple and attractive all-over colowork pattern. FILO keep a toddler’s hands warm, leaving the fingers free for the child’s busy exploration. These unisex fingerless gloves are ideal for knitters who want to attempt colorwork since every row is knit with a single color. These are great stash busters to use up the left over sock yarn from other projects.
Around a year back, when I saw the Quilted Lattice Stitch in one of the Barbara Walker’s Treasury books, I knew I had to use this for a girl’s cardigan. I was in love with the collared-open-look cardigans and this stitch seemed to be perfect for that. I made my first sample using sports weight yarn and was mighty pleased with the result. I worked on grading and released the pattern to testers. While the testers testing the smaller sizes were very happy with the cardigan, the bigger sizes had a problem of the raglan edge puckering up. It was so bad for the biggest two sizes that I was completely disappointed with my designing (or lack of) skills. As I continued to knit from other designers’ patterns and work on my own design skills, I realized what was the problem with the original Hira. I redid everything using fingering weight yarn, re-graded, got it re-tested and I present you Hira take two.
I used SweetGeorgia Merino Silk Fine in Pomegranate colorway. The different shades of pink and purple in this colorway are soft and subtle. These pictures do not do justice to the amazing colors, but I had to be satisfied with these. Felicia of SweetGeorgia yarns is so sweet (is it why the yarn name has ‘sweet’ in it?) and agreed to send me some yarn for the sample. The yarn is buttery soft, has lovely stitch definition and the silk content adds a shine and drape to this. Knitting with this yarn was a pleasure in itself. The stitches just glide over the needles like butter.
I made the non-beaded version, but one of my testers, Steph, made the beaded one and I love it. Her choice of yarn color and the beads work so well, do you agree?
I am so pleased with this cardigan that I am planning to make one for myself. Do you think this cardigan will work in adult sizes? Would you do any modification to make this work for bigger girls?